All KieTek products are made with pride in Queen Creek, Arizona.
Lifts and Dollies
KIETEK IS MATERIAL HANDLING
LIFTS AND DOLLIES
Lifts are designed to convey loads up or down from trailers to cargo decks and dollies. KieTek uses lifts designed to meet your specific requirements.
SCISSOR LIFT
The Scissor Lift
is surface-mounted or pit-mounted, depending on the application.
4-POST LIFT
The 4-Post Lift
lends itself to a broader application than any of the lifts KieTek sells.
DYNA LIFT
The Dyna Lift
offers excellent custom deck modifications for a low lift height.
RAM LIFT
The Ram Lift
is the lowest-priced alternative for situations that require minimal height adjustment. It’s hinged on one end, allowing the trailer to interface with the dock for unloading or loading. The Ram Lift adjusts from 0” to 6’’.
Custom-built trailer ramps are used in conjunction with these lifts to bring trailers level, for better container control as trailers are backed into a pit for unloading.
KieTek distributes LCOA lifts — www.liftcoa.com. Please call for detailed pricing and information. These are special-order items.
MT3440 PUMP. 6 QUART HEAVY DUTY POLY TANK.
Single acting (power up, gravity down), 12 volt, adjustable psi to 3000 lbs, set at 3000 lbs. (2.1 GPM). 24 x 7 x 7 1/2, 40 lbs. Heavy Duty Bearing Motor. Horizontal mount, port 9/16-18 #6 SAE O-ring . Uses 3 wire remote
MTE AUTO HOIST 115 VOLT
Hydraulic power unit, auto hoist type, 1 GPM at 2300 psi, for single acting cylinders. 1 HP 115 volts AC, motor runs at 3450 rpm, relief is set at 2750 psi. Pressure port is #6 (9/16-18). Tank is 3.5 gallon plastic. Vertical mounting. Integrated pressure port check valve. Manual lever valve. 57 lbs