KieTek designs products for customer applications. We provide solutions
and alternatives to the method that materials and loads are handled today.

800-510-4888

Lifts Special Order


Lifts are designed to convey loads up or down from trailers to cargo decks and dollies. Applications may vary from location to location.


KieTek utilizes lifts designed to meet the customer’s specific requirements.


The Scissor Lift is surface or pit mounted depending on the application. Not all lifts will fit the application or customer’s budgets.


The 4-Post Lift lends itself to a broader application than any of the lifts KieTek sells.


The Dyna Lift offers excellent custom deck modifications for a low lift height.


The Ram Lift offers the lowest price alternative that requires minimal adjustment height.


In conjunction with these lifts are the trailer ramps custom built to bring trailers level for better container control when trailers are backed into a pit for unloading.

index.html
Homeindex.htmlindex.htmlshapeimage_7_link_0
about.html
Aboutabout.htmlabout.htmlshapeimage_9_link_0
products_and_services.html
Products & Servicesproducts_and_services.htmlproducts_and_services.htmlshapeimage_11_link_0
contact.html
Contactcontact.htmlcontact.htmlshapeimage_13_link_0

KieTek distributes ecoa lifts
www.ecoalifts.com


Please call for detailed pricing & information.

MT3440 Pump.  6 quart  heavy duty poly tank.


Single acting (power up, gravity down), 12 volt, adjustable psi to 3000 lbs, set at 3000 lbs. (2.1 GPM).  24 x 7 x 7 1/2, 40 lbs.  Heavy Duty Bearing Motor.  Horizontal mount, port 9/16-18 #6 SAE O-ring . Uses 3 wire remote

MTE Auto Hoist 115 volt


Hydraulic power unit, auto hoist type, 1 GPM at 2300 psi, for single acting cylinders. 1 HP 115 volts AC, motor runs at 3450 rpm, relief is set at 2750 psi. Pressure port is #6 (9/16-18). Tank is 3.5 gallon plastic. Vertical mounting. Integrated pressure port check valve. Manual lever valve.  57 lbs

Remote: two button, 3 wire


Extreme Weather Case

15 foot cord